Infinity GPS-MIC-1 - Manual (Page 32)

7.5 Compass
Enables compass mode
FUNC Press FUNC to switch function page
ENTER
Press Enter button to switch two different types
of compass view.
Press and hold in to the calibrating mode.
MENU Return to main list
z Calibrating the COMPASS: Making sure that the unit is level with the ground in a horizontal position,
press and hold the ENTER Button for 4 seconds to access the compass calibration mode. Rotate the unit
clockwise slowly twice (2 x 360 degrees) in the same direction. Then press the ENTER Button again to
see if the procedure was done correctly. If not and error message will be displayed.
z Note: Please keep the unit out of any magnetic fields, near any speakers, vehicles, metal objects, metal
shelters, tanks or buildings when calibrating the compass.
32