Integra DPC-7.4 - Manual (Page 37)

37
Advanced Playback —Continued
With the Last Memory function you can resume playback
from where you left off even if another disc has been selected
or the disc has been removed. Last Memory also remembers
the soundtrack and subtitle languages that you were using.
Notes:
• The Last Memory function can store the settings for up to
six DVD-Videos. When you set the Last Memory function
for a seventh disc, the first disc’s settings are lost.
• The Last Memory function can remember the settings for
one Video CD, and those settings will be lost when another
disc is selected.
• The Last Memory function may not work properly with
some PBC Video CDs.
• The Last Memory function will not work while a menu is
being displayed onscreen.
• The Last Memory function may not work with some
DVD-Videos.
• Even if you select another disc, or inadvertently turn off the
DPC-7.4 during playback, you can resume playback from
the same point when you select the disc again.
Using Last Memory
1 During playback, press the [Last M]
button.
The last memory point for the disc is
stored, the LAST indicator appears, and
“LAST MEM” appears on the display.
If the [Last M] button is pressed again, the
last memory point will be updated.
2 To stop playback, press the Stop
[ ] button once or twice.
At this point you may choose to
play another disc, or to turn off the
DPC-7.4.
3 To resume playback, select the disc
and press the Play [ ] button.
The Last Memory dialog box appears, as
shown.
+10
Disc 1 Disc 2 Disc 3
Disc 4 Disc 5 Disc 6
Step/Slow
Clear
1 2 3
6 4 5
Setup
Top Menu
Return
Audio
Stop
Down FF FR Up
Play Pause
Angle Subtitle
Open/
Close
On Standby
Enter
7 8 9
0
Search Last M Memory Chain Mode
Repeat
A-B
Random
Display
Menu
Chain Mode Last Memory Dimmer Repeat Display Play Stop Pause Disc Skip
Open /Close
Enter
DPC-7.4
Play/Enter Display
Display
Last Memory
Last M
Enter
Stop
Play
Stop
DVD VCD
Last Memory
Last M
Remote controller
Stop
Stop
Remote controller
Play
Enter
Play
Remote controller
Last Memory is set.
Start playback from memory location ?
Yes No Memory Clear
4 To resume playback from last mem-
ory point, select “Yes,” and then
press [Enter].
To start playback from the beginning,
select “No,” and then press [Enter].
To start playback from the beginning and
delete the last memory point, select
“Memory Clear,” and then press [Enter].
Enter
Remote controller