Icom iM304 - Manual (Page 19)

13
6
DSC OPERATION
5
6
■ MMSI code programming
The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only twice.
q Turn power OFF.
w While pushing and holding [DSC], turn power ON to enter
MMSI code programming condition.
e After the display appears, release [DSC].
• A cursor starts blinking.
r Edit the specified MMSI code by pushing [Y] or [Z].
• Push [ !6] or [CH/WX] to move the cursor forward or backward,
respectively.
t Input 9-digit code, then push [DSC] to set the code.
• Returns to the normal operation.
■ MMSI code check
The 9-digit MMSI (DSC self ID) code can be checked.
q Push [DSC] to enter the DSC menu.
w Push [Y] or [Z] to select “
” and push [DSC].
e Check the 9-digit MMSI (DSC self ID) code.
• The MMSI code is displayed and scrolls at the channel comment
indicator.
r Push [DSC] to return to the normal operation.
MMSI (DSC self ID) code scrolls