Intellivision Productions 10Video - Manual (Page 2)

Thank you for purchasing the Intellivision 10
Video Game System, an entertainment
handheld controller featuring a complete joy
pad gaming operation. This unit includes
controller with built-in software and A/V cable.
Please read the setup instructions and
precautions / warnings before attempting
to connect the Intellivision 10 Video
Game System to your TV.
The TV must have Audio/Video Input (AV) Jacks to
be able to play the Intellivision 10 Video Game
System - if the TV does not have the Input Jacks
you may purchase a RF/Scart Adapter that has AV
inputs built in.
If you chose to connect the unit through your VCR
you may need to select the LINE OUT button on the
TV/VCR to display the initial menu screen.
You may need to consult the instruction guide to
the TV or VCR for more information about your
specific equipment.
Installing the Batteries
Have an adult install 4 "AA" batteries(not
included). Caution: When installing the
batteries make sure that the positive (+) and
negative (-) ends are facing in the correct
position . Follow the diagram in the battery
compartment. Note: when the batteries begin
to lose their charge, the power indicator LED
will begin to dim. and the Intellivision TV
Play Power Controller will turn itself off.
Remember to take out batteries when the
Intellivision TV Play Power Controller is not
being used for a long time.
Intellivision 10 Video Game Operations
1. Make sure the power switch on the unit is
in the off position.
2. Turn your TV on and turn to the channel
that accepts the input line.
3. Place the power switch on Controller to
the on position the indicator light should
be lit (If not, check the batteries).
4. The TV screen will display the opening
screen shot for approximately 10 seconds.
The next screen will display the Game List.
5. Select a game by going left or right with
8 Way Direct Pad and press the “A” button
to commence play.
How to turn off the Intellivision 10 Video Game
System
1. Place power switch in the off position.
2. Turn your TV to the desired channel to
view regular TV programs (When using
A/V jacks you will need to set the TV/Video
switch back to the TV position).
Trouble Shooting
1. No picture to the screen
* Is the Intellivision 10 Video Game System
turned on?
* Is the TV turned on?
* Is the AV output connected properly?
* Is the battery capacity too low?
* Are the batteries installed properly?
2. Screen Flickers or no color
* Are the TV’s color controls set correctly?
3. No game Sound
* Is the TV volume set too low or in the off
position?
* Has the Audio cable come loose or
become disconnected?
4. Picture on TV screen is unsteady
* Adjust the vertical and horizontal
controls until corrected.
5. Picture is blinking or distorted
* Press the reset button. If there is no
improvement power off the unit and
try again.
6. No Power
* Check whether the batteries were installed
properly.
Hardware Precautions/Maintenance
1. Do not disassemble or try to repair the
Intellivision 10 Video Game System unit or
its components.
2. Always place the power switch in the off
position before connecting the unit to
the TV.
3. Do not store the unit in a humid place or
where it could collect dust, lint or other
debris.
4. Do not drop, hit or otherwise abuse the
unit or its components
5. Make sure that all connections to the unit
are correct(refer to Back View Diagram)
and that the plugs are inserted straight
into the proper sockets.
6. Make sure the unit is in the off position
before disconnecting any plugs. Carefully
remove the cables from the plug itself, and
not by pulling on the cable.
7. Do not expose the unit to high heat or
direct sunlight for extended periods of
time. This will cause the unit not to work.
8. Do not spill any liquids on the unit or its
components. If cleaning the unit, use a
soft damp cloth and let it dry completely
before attempting use.
9. Do not rapidly turn the power switch
on/off. This may shorten the life of the
batteries.
Warnings & Precautions
A very small portion of the population have
a condition which may cause them to
experience epileptic seizures or have
momentary loss of consciousness when
viewing certain kinds of flashing lights or
patterns that are commonly present in our
daily environment. These persons may
experience seizures while watching some
kinds of television pictures or playing
certain video games. Players who have not
had any previous seizures may nonetheless
have an undetected epileptic condition.
If you or anyone in your family has
experienced symptoms linked to an epiletic
condition (e.g. a seizure or loss of
awareness) immediately consult your
physician before using any video games.
We recommend that parents observe their
children while they play the games. If you or
your child experience any of the following
symptoms: dizziness, altered vision, eye or
muscle twitching, involuntary movements,
loss of awareness, disorientation, or
convulsions, DISCONTINUE USE
IMMEDIATELY and consult your physician.
FOLLOW THE PRECAUTIONS WHENEVER
USING the Intellivision 10 Video Game
System :
• When using your controller do not sit or
stand too close to the television.
• Do not play if you are tired or need sleep.
• Always play in a well lit room.
• Be sure to take a 10 or 15 minute break
every hour while playing.
Repetitive Strain Warning
Some people may experience fatigue or
discomfort after playing for long periods of
time. If your hands or arms become tired or
uncomfortable while playing, stop and rest.
Warning! Not Suitable for children under
36 months in case of unforeseen use in
particular of small parts and long cords,
giving rise to harm.