Integra DPS-6.5 - Manual (Page 49)

49
Initial Settings menu —Continued
Default setting: STEREO
If you’ve selected DTS > PCM in DTS Out on page 43
or 2 Channel in Audio Output Mode below section, you
can choose the way the signal is downmixed to PCM
audio. Stereo will downmix the DTS signal to 2-channel
stereo, whereas Lt/Rt will downmix to a 2-channel signal
compatible with Dolby surround matrix decoders. (This
allows you to hear surround sound if your AV receiver or
amplifier has Dolby Pro Logic capability.)
Default setting: 2 Channel
If you connected this player to your amplifier using the
5.1 channel analog outputs (front, surround, center and
subwoofer outs), set this to 5.1 Channel; if you con-
nected only the stereo outs, set to 2 Channel.
Notes:
• Even if you set Audio Output Mode to 5.1 Channel,
you’ll only get sound from all speakers when playing
a 5.1 channel multichannel disc.
• When set to 5.1 Channel, only the front left/right
channels are output from the AUDIO OUT (2ch)
jacks. Change to 2 Channel if you want to listen to
downmixed stereo audio (for example, because you
are listening through the TV’s built-in speakers).
• When set to 5.1 Channel there is no digital output
when playing DVD-Audio.
• If you set to 2 Channel, Dolby Digital, DTS and
MPEG audio is mixed down to two channels so you
still hear all the audio recorded on the disc. With DTS
encoded audio, you can choose how the signal is
downmixed to PCM audio. See DTS Downmix above
to change the downmix setting.
• Some DVD-Audio discs don’t allow downmixing of
audio. These discs always output multi-channel audio
regardless of the setting made here.
Default settings: L/R: Large, C: Large, LS/
RS: Large, SW: On
You only need to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs.
This setting does not affect digital audio output.
Use the Speaker Installation screen to tell the player
what kinds of speakers you have connected.
DTS Downmix
Audio Output Mode
Digital Audio Out
Video Output
Language
Display
Options
Speakers
STEREO
Lt/Rt
Initial Settings
Parental Lock
DVD Playback Mode
SACD Playback
DTS Downmix
DivX VOD
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Distance
Speaker Installation
2 Channel
5.1 Channel
Initial Settings
Speaker Installation
1 Use the / (cursor up/down)
buttons to select a speaker.
• The L and R, and RS and LS speakers
are paired; you can’t set them differ-
ently.
2 Press (cursor right) to modify
the selected speaker.
3 Use the / (cursor up/down)
buttons to change the current set-
ting.
• You can see the effect of your changes
in the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to Large or Small. If the
main speaker cone in the speaker is
12cm or more, set to Large, otherwise
set to Small (or Off if you don’t have
that speaker).
• If you set the front L and R speakers to
Small, the center and surround speak-
ers are automatically set to Small and
the subwoofer to On.
• The subwoofer can only be set to On or
Off.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Distance
Speaker Installation
Initial Settings
5.1 Channel
Enter
Digital Audio Out
Video Output
Language
Display
Options
Speakers
L
C
R
RS
LS
SW Large
Large
Large
Large
Large
On
Initial Settings
Enter
DPS-6.5.book Page 49 Thursday, August 5, 2004 3:27 PM