Insignia NS-C2114 - Manual (Page 16)

14
NS-C2114 Under-Counter Clock Radio
www.insignia-products.com
Connecting an external audio input device
To connect an external audio input device:
1 Make sure that your radio is turned off and unplugged from the
power outlet.
2 Plug the left and right audio connectors on an audio cable (not
included) into the L and R AUX IN jacks on the left side of your
clock radio.
3 Plug the other end of the audio cable into the Audio out jack on the
audio input device.
4 Plug the AC power cord into an power outlet, then press the
POWER button to turn on your radio.
5 Press the FUNCTION button one or more times until AUX appears
on the display.
6 Turn on the external audio device and use the device’s controls to
control playback.
Maintenance
Cleaning the exterior
To clean the exterior
• Use a soft cloth dampened with luke warm water only to clean
the exterior of your radio.
Caution Make sure that you do not drip water into your radio.
Do not use solvents, such as benzene, because they may damage
the finish.
G N I N U T B W N I X U A R L
NS-C2114.fm Page 14 Friday, March 17, 2006 4:40 PM