Intellinet Network Solutions 523967 - Manual (Page 60)

Follow the following instructions to set wired LAN parameters:
Click the 'LAN' menu on the left of the Web management interface. There
are three setup groups here: 'LAN IP', 'DHCP Server', and 'Static DHCP
Leases Table'. Here are setup instructions for each of them:
2-6-1 LAN IP section:
Items and meanings:
IP address (1):
Enter the IP address of this router.
Subnet Mask (2): Enter the subnet mask for this network.
802.1d
If you wish to activate the 802.1d spanning tree
Spanning Tree (3): function, select 'Enabled' for setup item '802.1d
Spanning Tree', or set it to 'Disabled'.
DHCP Server (4): If you want to activate the DHCP server function of
this router, select 'Enabled', or set it to 'Disabled'.
Recommended values if you don’t know what to enter:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
1
3
2
4