Integra DPS-9.1 - Manual (Page 21)

21
DPS-9.1 US_E 29343004
1
3
If the screen on the right
appears - Screen Saver
If you pause for a long time, the screen
saver operates.
To resume normal playback, press
(You can set this function to Off using
the menu explained in “Customizing the
Function Settings” starting from page
44. See page 51 for direct information.)
Notes
• Do not move the DVD Player during playback. Doing so may
damage the disc.
• Use on the remote controller or DVD Player to open and
close the disc tray. Do not touch the disc tray while it is
moving. Doing so may cause the DVD Player to malfunction.
• Do not press down on the disc tray or put any objects other
than playable discs on the disc tray. Doing so may cause the
DVD Player to malfunction.
• In many instances, a menu screen appears when playback of a
movie is complete. Prolonged display of an on-screen menu
may damage your television set, permanently etching that
image onto its screen. To avoid this, be sure to press once
the movie is complete.
Tip to obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal
broadcast may appear on the TV screen while playing a DVD-Video
because the high resolution pictures on these discs include a lot of
information. While the amount of noise depends on the TV you use,
you should generally adjust the TV to reduce sharpness when viewing
DVD-Videos.
To remove the disc
Press to open the disc tray.
Remove the disc after the disc tray opens completely.
After removing the disc, be sure to press the button again to close the tray.
To pause playback (still mode)/
Playing frame by frame
Press during playback.
To start playback, press .
To play frame by frame
VCD DVD-V
Press the button repeatedly during pause. Each time you press the button the picture
advances one frame.
To resume normal playback, press
.
Notes
• The sound is muted during still mode and frame by frame playback.
• When using a DVD-Audio that includes pictures, this operation may be permitted
in some picture segments.
To stop playback
Press .
When you press to restart playback, playback starts from the location
where you stopped playback because the location index is stored in memory.
Note
The location where playback resumes may vary depending on the disc or the scene
where you stopped.
Resuming playback from the beginning
Press again after stopping playback to clear the location index memory, then press
to start playback.
DVD-V Playback starts from the beginning of the current title.
DVD-A Playback starts from the beginning of the current group.
VCD CD Playback starts from the beginning of the disc.
To start playback from the beginning of the DVD-Video or DVD-Audio, press to
open the disc tray then press to close the disc tray and start playback.
Notes
The location index memory will also be cleared when:
• The power cord is unplugged.
• The disc tray is opened.
• The parental lock setting is changed (see page 52) or a disc menu language is
selected (see page 50).
• The location where playback resumes may vary depending on the disc or the scene
where you stopped. With DVD-Audio, playback may restart from the beginning of
the track.
• To change the Audio Out Select (see page 48) or the On-Screen Language (see
page 50) settings, press after stopping playback to clear the location index.
Please note that resumed playback is not possible after this is done.
DPS-9.1(US_E)p20-26.p65 10/11/00, 18:58 21