IOGear MINIVIEW GCS632U - Manual (Page 18)

NOTE:
If using the Num Lock and Minus key to invoke
Hotkey function is not optimal, refer to the next
page for instructions on changing the hotkey
invocation keys.
When Hotkey Mode is active, ordinary
keyboard and mouse functions are
suspended – only Hotkey compliant
keystrokes can be input. At the
conclusion of some hotkey operations,
you automatically exit Hotkey mode.
With some operations, you must exit
manually by pressing the Esc or
Spacebar on your keyboard.
Switching Ports
You may also switch ports on the KVM
by doing the following:
1. Invoke Hotkey Mode (See page 11)
2. Press and release the computer’s
port number (1 or 2)
3. Press [Enter]
The KVM focus switches to the specified
port and automatically exits Hotkey
mode
15
Operation