IOGear MINIVIEW GCS632U - Manual (Page 12)

Step. 2
Installation
9
Plug the USB, video, and speaker
connectors of the attached KVM
cables into their respective ports on
the computers you are installing.
NOTE: The computer attached to the cable
with one dot at its base is the Por t 1
computer; the computer attached to the
cable with two dots at its base is the Port 2
computer (see p. 10 for hotkey por t
selection).
Repeat the above step for your second
computer.
Turn on the power to the computers
and refer to Operations Instructions.
3.
4.
5.
NOTE: The GCS632U’s Power On default is
to link to the first computer you turn on.