Ives 232TGSL - Manual (Page 3)

3
LUBRICATION
Ingersoll--Rand No. 50 Ingersoll--Rand No. 100
Always use of an air line lubricator. We recommend the
following Filter--Regulator--Lubricator Unit (FRL):
Inside USA use FRL unit # C28--04--FKG0--28
Outside USA use FRL unit # C28--C4--FKG0
After each eight hours of operation, if an airline
lubricator is not used, remove the Oil Chamber Plug (17)
and fill the oil chamber with Ingersoll--Rand No. 50 Oil.
After each eight hours of operation, or as experience
indicates, inject about 4 cc of the Ingersoll--Rand No. 100
Grease into the Grease Fitting (16).
INSTALLATION
(Dwg. TPD905--2)
F L
R
Main Line(s) Inner Ø
to be 3X Size of
Air Tool’s Inlet Ø
To Air
System
To Air
Tool
Lubricator
Emergency
Shut--Off
Valve
Regulator Filter
Compressor
FRL
Drain Regularly
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool’s Inlet Ø
SPECIFICATIONS
Model Handle Drive Recommended Torque Range
I.D. Type inches ftSlb (NSm)
232TGSL pistol 1/2 sq. 40--400 (64--542)