Insignia NS-S6900 - Manual (Page 7)

7
NS-S6900 6" × 9" 4-Way 90-Watt Car Stereo Speakers
www.insignia-products.com
Package Contents
• Speakers (2)
• Metal grills (2)
• Speaker wire (6 feet (3 m))
• Screws (8)
• Clips (8)
Installing the speakers
To cut mounting holes:
1 Make sure that the negative terminal on the vehicle battery is
disconnected.
2 Select a mounting location that has enough depth to
accommodate the speakers.
3 Use a included template to mark the cutting area. The template
diameter should be 8.62" × 5.87" inches (219 × 149 mm). Screw
hole diameters should be 5 mm.
4 Remove the vehicle panel that must be cut, then cut the hole in the
panel.
Note
Installation kits are available from your dealer or local stereo
shop to help make your installation easier. These kits also
give your installation a clean, custom appearance. If you
have questions about installations methods, see a
professional auto sound dealer or installer for help.
Template
Rear tray
8.62"
(219 mm)
5.87"
(149 mm)