2 removing/installing the front wheel, For this procedure, refer to figure 9.2, Removing – Invacare Lynx L-3X User Manual
Page 38: Remove the front wheel from the fork, Installing, Align the front wheel with the fork mounting holes, Securely tighten the front wheel mounting hardware, Fork mounting hole, Figure 9.2 removing/installing the front wheel
9 WHEELS AND CASTERS
38
9.2
Removing/Installing the Front Wheel
Removing
1.
Turn power off and remove the key from the ignition.
2.
Place the front of the powered scooter up on blocks so that the
front wheel is off the ground.
3.
Remove the mounting screw, locknut, two spacers and washer that
secure the front wheel to the fork.
4.
Remove the front wheel from the fork.
Installing
1.
Align the front wheel with the fork mounting holes.
2.
Using the mounting screw, locknut, two spacers and washer, secure
the front wheel to the fork.
3.
Securely tighten the front wheel mounting hardware.
FIGURE 9.2 Removing/Installing the Front Wheel
For this procedure, refer to FIGURE 9.2.
Take note of position and orientation of wheel and mounting hardware before removing.
Fork
Mounting
Hole
Spacer
Locknut
Fork
Mounting
Screw
Spacer
Front
Wheel
Fork
Mounting
Hole
Washer