Inter-Tel INT1400 - Manual (Page 26)

14 INT1400 Cordless Telephone User Guide
Installing the Handset Battery Pack
To install the battery pack:
1. Remove the battery cover by press-
ing the latch and sliding the cover
down and off of the handset.
2. Connect the battery pack connec-
tor, observing correct polarity to
the jack inside the battery compart-
ment, as shown on the right.
NOTE: Do not exert any force on
this connection. It could cause dam-
age to the battery or handset. Once
you are certain that you have made
a good connection, then insert the
battery pack into the battery com-
partment. Do not pinch the wires.
3. Replace the cover and slide it up
until it latches into the handset.
BATTERY COVER