IOGear GHPU01 - Manual (Page 68)

Sharing Internet Access
a. Make sure that the DSL/Cable modem is connected to the Router (using the WAN port
on the router.)
b. Connect the HomePlug Bridge to the Router (using the Uplink port on the router.)
c. Check the link light on the HomePlug Bridge. It must light up green.
IMPORTANT:
The HomePlug Bridge MUST connect to the "Uplink" port on the router.
d. Make sure that the computers that need access to the Internet via the HomePlug
network are each connected to a HomePlug Adapter or a HomePlug Bridge and reside
on the same power grid.
65