Infrasonic BLOW5D - Manual (Page 3)

BLOW5/BLOW5D User’s Manual
3
INTRODUCTION
Thank you for purchasing BLOW5!
Before using this gear, please carefully read the ‘CAUTION’, and ‘SAFETY’ sections and the boxed out
‘IMPORTANT NOTE’ sections. These sections provide important information for the proper operation of the unit.
And, in order for you to get a better monitoring experience, the user’s manual should be read entirely. This
manual is intended to familiarize you with all the control elements of the BLOW5 speakers. This unit handled
correctly, will give you high quality sound, and a great listening experience for years to come.
BLOW5 powered near field studio monitoring speaker features a two-way, bi-amplifier designed to achieve high
quality sound. The frequency response is broadened downward by using the bass reflex system, and
broadened upward by a natural silk dome tweeter. Together they provide very delicate signal reproduction. The
speakers wide frequency response is also due in part to the design of it’s enclosure.
The analog input connector provides for an XLR balanced input and a TRS 1/4” phone jack balanced or
unbalanced input.
BLOW5 also has its optional DA-912 digital input connector. This connection provides the AES/EBU XLR input,
S/PDIF RCA input and RCA thru output. It supports a 192 kHz sample rate at a 24-bit resolution as well as a
high-end D/A converter with 123 dB dynamic range.
You can also adapt BLOW5 to your control room acoustics by the select controls on the back panel. As you set
the units for your ears, they will prove to be more accurate than any other monitoring speaker.
From professional users in commercial studios to home studio owners, BLOW5 is the true advanced solution
for near field studio monitoring in its class.
INDEX
1. Main Features
1.1. BLOW5
1.2. DA-912 (included in BLOW5D)
2. PANEL DESCRIPTIONS
2.1 Front View
2.2 Rear View
2.3. DA-912 (included in BLOW5D)
3. INSTALLATION
3.1. Positioning Speakers
3.2. Adapting the BLOW5 to the room acoustics
4. CONNECTION
4.1. Powering Up
4.2. Analog Audio Input
4.3. Digital Audio Input (included in BLOW5D)
5. SPECIFICATIONS
5.1. BLOW5
5.2. DA-912
6. END USERS WARRANTY