Infrasonic BLOW5D - Manual (Page 12)

BLOW5/BLOW5D User’s Manual
12
4.3. D
IGITAL
A
UDIO
I
NPUT
(
INCLUDED IN
BLOW5D)
ƒ Connect the XLR for AES/EBU cable to the AES/EBU input or the RCA for S/PDIF coaxial input of the rear
panel.
ƒ Connect ‘THRU’ to the RCA coaxial input of the other unit with RCA cable.
ƒ Select the channel of each unit’s panel
ƒ Input Select Switch should be selected on digital input.
ƒ Select the source of digital input according to the type of digital input.
ƒ Refer to the following diagram.
< Connecting of Digital AES/EBU and S/PDIF cable >