IBM 2104 Model DU3 - Manual (Page 53)

Unconfiguring a 2104 from the using system
AIX
To remove a 2104 from the using system running AIX, use the following command:
rmdev -l [enclosurenumber] -d
where [enclosurenumber] is the enclosure device that was generated by the cfgmgr
command (for example, [ses0], [ses1], [ses2]).
Remove the ses_healthcheck job from the system cron table.
Linux
To remove a 2104 from the using system running Linux, bring the Linux system
down, power off, and disconnect the 2104, and then reboot the Linux operating
system.
Appendix A. Operating with RISC Systems 37
|
|
|
|
|
|
|
|
|
|
|