Icom IC-7200 - Manual (Page 5)

5
o After restarting the PC, connect the transceiver to
the PC with the USB cable (third party) as shown
below.
• Be sure to connect the USB cable correctly and not up-
side down.
Transceiver
PC
USB cable
(third party)
To USB jack
To USB port
Type A
Type B
ACC
KEY SEND ALC
REMOTE
!0 Turn the transceiver power ON.
• “Installing device driver software” appears as below.
!1 After the dialogue appears as below, USB driver
installation has been completed.
Windows Vista (Continued)
DRIVER INSTALLATION