Driver installation, Windows vista – Icom IC-7200 User Manual
Page 4
4
Windows Vista
DRIVER INSTALLATION
The displayed dialogue boxes, indications or oper-
ations may differ slightly from the following instruc-
tions according to your system conditions or envi-
ronment.
q
Make sure that the transceiver is not connected to
the PC.
w
Start up Windows.
• Quit all other application if running.
e
Double-click the “WinVista” folder.
• The folder construction: “7200UsbDrv_v100” ➞
“Driver” ➞ “WinVista”
Double click
r
Double-click the “CP210xVCPInstaller.exe” to start
up the USB driver installer.
Double click
t
“A program needs your permission to continue” dia-
logue box appears as below.
Click [Continue].
Click
y
Verify the installation location, then click [Install].
Click
u
Windows starts scanning for the system, then starts
installing the USB driver.
i
After the installation is completed, click [OK].
• Restarting the PC is recommended.
Click
NOTE:
•
NEVER connect the transceiver to the PC with the USB cable (third party) until the USB driver installation
has been completed.
• The USB driver for Windows Vista does not support the automatic recognition system.
☞
Continues to the next page