Features, Iti-5100g and gf models, Iti-5100g model – IntraServer Technology ITIpci 5100G/GF User Manual
Page 13: Iti-5100gf model, Key protocols and interfaces

LSI Logic Corporation
Page 13 of 56
Features
Following is a list of the Gigabit Ethernet PCI adapter features:
ITI-5100G and GF Models
•= Full-duplex Gigabit Ethernet interface (IEEE P802.3-1999)
•= Jumbo Frame support (optional 9,000 byte frames for server-
to-server traffic)
•= Standard Ethernet frame size (up to 1518 bytes)
•= Dual Homing for automatic failover if a port, switch, or
adapter is down
•= VLANs: up to 64 VLANs per adapter using IEEE 802.1Q-
1998 tagging
•= Adaptive interrupt frequency (maximizes network
throughput; adapts to traffic load)
•= Dual DMA channels
•= 33/66 MHz, 32-bit or 64-bit PCI bus master with adaptive
DMA
•= Universal dual voltage signaling (3.3V and 5V)
•= PCI Local Bus Rev 2.1 compliant (6.8"x 4.2")
•= ASIC with on-chip MAC and dual RISC processors
•= Status LEDs
ITI-5100G Model
•= CAT-5 compatible twisted pair Ethernet Connector
•= Interoperability with existing Ethernet and Fast Ethernet
Equipment
ITI-5100GF Model
•= Duplex SC fiber-optic connector
Key Protocols and Interfaces
ITI-5100G/GF adapters are interoperable with existing Ethernet equipment
assuming standard Ethernet minimum and maximum frame size (64 to 1518