Invacare Jasmine JLS5 - Manual (Page 2)

Jasmine™ Scale JLS5 2 Part No 1152408
Removing the Swivel Bar/Cradle Attachment
NOTE: For this procedure, refer to FIGURE 1.
1. Remove the side rubber caps.
NOTE: Support the swivel bar or cradle attachment from underneath while removing the attaching hardware.
2. Remove the socket head screw, washer, bushings, top rubber cap, nylon spacers, washer and nut
that attach the swivel bar or cradle attachment to the boom.
NOTE: When the attaching hardware is removed, the pin, washer and o‐ring will become loose.
NOTE: Save the socket screw, small steel washer and locknut to secure the Jasmine Scale to the boom.
NOTE: Save the remaining hardware for future use of the swivel bar or cradle attachment without the scale.
FIGURE 1 Removing the Swivel Bar/Cradle Attachment
Top Rubber Cap
Side Rubber Cap
Nut
Washer
Nylon Spacer
Nylon Spacer
Side Rubber Cap
Socket Head Screw
Washer
Bushing
Swivel Bar
Bottom Rubber Cap
Pin
O-ring
Washer
Optional Cradle
Attachment Bushing