Creating station speed-dial buttons – Inter-Tel 8526 User Manual
Page 68
56
Inter-Tel
®
Model 8524/8525/8526 User Guide
MOVING ON
Creating Station Speed-Dial Buttons
If your telephone system supports it, you can program the programmable buttons as
speed-dial buttons by selecting a speed-dial number to associate with the button.
NOTE:
Before you program a speed-dial button, you need to store a number in a
speed-dial location (see the previous instructions).
To program a user-programmable function button as a Station Speed-Dial but-
ton:
1.
Press
and dial
.
2.
Press the feature button you want to change into a Station Speed-Dial button.
3.
Dial
(default Station Speed Dial feature code).
4.
When the display asks for a number, dial a digit 0-9. This is the station speed-
dial number “location.”
You can now use the procedure outlined on
to program and use the Station
Speed-Dial button.
To view the current programming of Station Speed-Dial buttons:
1.
Press
and dial
.
2.
Press the Station Speed-Dial button (e.g.,
) to be viewed.
3.
Press
to exit.
To erase a station speed-dial name and/or number:
NOTE:
To erase a station-dial name and/or number, you must pre-program the Back-
space button (feature code 314) on your endpoint. Refer to
, Programming You
Feature Buttons section for details on how to program the backspace button.
1.
Press
and dial
.
2.
Dial the location code (0-9) to be erased.
3.
To remove the name: Press the Backspace button (e.g.,
) repeatedly
until the name is erased.
4.
Press
to continue.
5.
To remove the number: Press the Backspace button (e.g.,
) repeatedly
until the number is erased.
6.
Press
to exit.
START
3
9
7
3
8
2
START
3
9
6
LINE
9
# >
START
3
8
3
FNC
3
# >
FNC
3
# >