II Morrow Inc. 920 - Manual (Page 64)

As you add waypoints, the route screen shows
the bearing to each waypoint and the distance
between them.
When you finish
inserting waypoints
into the route, select
“Done” and press
the ENTER key to
save the route in
memory.
Changing a Route Waypoint
You may change any waypoint along a route.
Select the route to change from the route
menu. Then, select “Edit” as if creating a
route.
Select a waypoint to change.
When the marker
arrow points to the
desired waypoint,
select “CHG” to
change it.
Make changes to the waypoints in the route as
desired. When changes are complete, select
“Done” to enter the changes into memory.
D
23