11 cd disc centering alignment – Insignia CQ-EH8160AK User Manual

Page 11

Text mode
Original mode

11 CD DISC CENTERING ALIGNMENT

· This adjustment is for assuring that compact discs will be placed in the center of the turntable.

· Power Supply Voltage : 13.2V
· Test Disc : TCD-792A

1. Attach the adjusting screw to the upper chassis (See Figure 1.).

2. Insert the test CD (TCD-792A) into the disc No.1 position and play it.

3. After checking whether the disc is centered on the turntable, turn the adjusting screw unit it is in the center.

· Check that the disc is correctly centered.
· Check that the disc is securely clamped.
· Check that no abnormal noise is produced when clamping the disc.

[Directions of Turning the Adjusting Screw]
· CD stops before its proper position : Turn the screw counterclockwise.
· CD overruns : Turn the screw clockwise.

4. After the adjustment, lock the screw.

HONDA / CQ-EH8160AK