IOGear GME229B User Manual

Quick start guide, Outside inside

Bluetooth

Wireless Tilt Wheel Laser Mouse

Quick Start

Guide

Warranty

Contact

Address: 23 Hubble, Irvine, CA 92618 USA

Toll Free: 866-9-IOGEAR

Phone: 949-453-8782

Web site: www.iogear.com

Email: [email protected]

About Us

FUN
IOGEAR offers connectivity solutions that are
innovative, fun, and stylish, helping people
enjoy daily life using our high technology
products.

GREEN
IOGEAR is an environmentally conscious
company that emphasizes the importance of
conserving natural resources. The use of our
technology solutions helps reduce electronic
waste.

HEALTH
IOGEAR supports healthy and fit lifestyles.
By integrating products with the latest
scientific developments, IOGEAR’s solutions
enhance the life of end-users.

WE’RE HERE TO HELP YOU!

NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

1. Use the live chat at www.iogear.com to try and solve any issues you may

be having with the product

2. Visit the Tech Info Library/FAQ on www.iogear.com (under the Support tab)

3. Call the 24/7 tech support line at 1-866-946-4327 (U.S. only) or

949-453-8782

Warranty Information

This product carries a 1 Year Limited Warranty. For the terms and conditions

of this warranty, please go to http://www.iogear.com/support/warranty or call

1-866-946-4327

Important Product Information

Product Model

Serial Number

GME229B

PART NO. Q1321

Pictorial Introduction

1. Tilt scroll wheel

2. Left click button

3. Battery low/charging/DPI indicator

4. Previous/Backward button

5. Next/Forward button

6. DPI switch button

Package Content

1 Bluetooth

Wireless Tilt Wheel Laser Mouse

1 USB battery charging cable

1 Carrying pouch

1 Quick start guide

System Requirements

- Computer/Laptop must be Bluetooth-enabled and support the HID profile

- Operating System:

Windows 2000/XP/Vista

Mac OS X v10.3.5 or later

If the computer/laptop is currently not Bluetooth-enabled, a Bluetooth

USB adapter will be required. Refer to IOGEAR part number GBU221,

GBU241W6, GBU341W6, and GBU421.

Specifications

Resolution: 400/800/1200/1600 adjustable

Mouse Report Rate: 230 report/sec

Frequency Band: 2.4 ~ 2.4835 GHz ISM Band

Interface: Bluetooth 2.0, Class II

Battery Type: Built-in 3.7V 400mA Li-Polymer Rechargeable Battery

Operating Range: 33 ft. (10m)

Charge Battery

Installation

Plug the USB cable into the mouse and the available USB port of the

computer, it will start charging. We do recommend that users charge

the battery for 10 hours before using the mouse in the first time.

During charging, all 5 battery charging indicators will blink. Once the

battery is fully charged, all indicators will turn off.

Note: To continuously charge the mouse via the USB cable, user’s

computer must be turned on or in standby mode.

1. Make sure the mouse is turned on. When you are on the go, turn

the mouse off to preserve battery life.

2. To make the mouse discoverable by the computer, press the

connect button on the bottom of the mouse. The blue LED will

flash at the sensor hole. It means the mouse is under pairing mode.

3. Make sure that your computer is enabled for a Bluetooth device. If

there is a wireless switch on the computer, be sure it is turned on.

4. Open the Bluetooth program and run the wizard to add a Bluetooth

device. On most computers, the Bluetooth is found either in

Control Panel or on the Start menu. Examples:

a. Some notebook computers: Start > Control Panel > Bluetooth

Devices.

b. Other notebook computers: Start > All Programs > Bluetooth >

Bluetooth Settings.

Start Here!

Function Keys

DPI Switch: Users can change the mouse resolution by pressing

DPI switch. GME229B supports 400,800,1200 & 1600 DPI. The

LED indicator will show different positions to indicate the DPI value

when a user presses DPI switch.

Page up, Page down: To press Page up/down button to change

page of document when you are surfing website.

Tilt Wheel: No need to install any driver/software to activate the tilt

wheel function. Once the connection has been set up, users can

enjoy the convenience from tilt wheel.

LED indicator
There are 5 LEDs to indicate the battery capacity when power on. 5

pcs of LED all light on means battery full and 1pcs of LED light on

means battery low. The LEDs will blink when charging and off when

charge complete.

7. Right click button

8. Connect button

9. Battery charging connection

10. Power on/off switch

11. Laser sensor

2 3

c. Toshiba: Start > All Programs > Toshiba > Bluetooth > Bluetooth

Settings.

d. Macintosh: Apple > System Preferences > Bluetooth > Set Up

New Device

If you are prompted for a passkey, enter “0000” (for added security), or

choose no passkey. This mouse will not work with any other passkey.

The LEDs show different positions to indicate the DPI you select when

press DPI switch. LED1:400 dpi, LED2:800 dpi, LED3:1200 dpi,

LED4:1600 dpi.

Low Battery
If the LED indicator only light on 1 LED, it means battery low. Please

plug charging cable to charge.

Charging Battery
LEDs will blink when charging battery. All LEDs will turn off and stop

blinking when the battery is fully charged. It will take about 2 hrs to

fully charge the battery.

Battery Full

Indicator

1600dpi

1200dpi

800dpi

Battery Low

400dpi

OUTSIDE

INSIDE