Inter-Tel AXXESS 8662 - Manual (Page 52)

42
MOVING ON
Axxess ® Model 8662 Phone User Guide – Axxess IP Mode
Changing Keymaps
Keymaps identify where feature buttons appear on your phone. While all phones are
programmed with a standard keymap, some phones have alternate keymaps (ask your
system administrator). If you have an alternate keymap, you can switch between the
keymaps by dialing a specific feature code.
To switch between keymaps when your phone is idle:
With the handset in the cradle, dial
.
To switch between keymaps during a call:
Press
and dial .
Enabling Automatic Call Answer
The Automatic Call Answer feature determines whether or not you are automatically
connected to a caller when you lift the handset (or press ). If this feature is enabled,
you are automatically connected when you go off-hook. If it is disabled, you must
first lift the handset (or press ) and then press the flashing button.
To enable/disable this feature for ringing outside calls:
With the handset in the cradle, dial
.
To enable/disable this feature for ringing (non-handsfree) intercom calls:
With the handset in the cradle, dial
.
3 9 9
3 9 9
3 6 0
3 6 1