iHome IA90 - Manual (Page 12)

Sound is distorted Volume level is set too high Decrease the volume
Sound source is distorted If the iPhone/iPod original sound source is old or of poor quality, distortion
and noise are easily noticed with high-power speakers. Try a different
audio file from a trusted source such as iTunes.
If you are using an external sound source try reducing the output volume
on the device itself. Also try turning bass boost OFF.
10
Troubleshooting
Solution Symptom Possible Problem
Unit/adaptor gets
warm after extended
play at high volume
This is normal Turn unit off for awhile or lower volume
Lower EQ settings. EQ settings are too high. For example, if the
treble is too high, the 3D effect may not sound
as good
Custom snooze time not set
Alarm not working AM/PM time/alarm time not set correctly When setting clock or alarm time, take note of the AM/PM indicators
Alarm time or source selected for alarm 2 , not
alarm 1 or vice versa
Alarm schedule setting is not correct Full week = 7 days, weekdays = 5 days (Mon-Fri), and weekends= 2
days (Sat-Sun). See page 4 for setting alarms.
Calendar is not set correctly, which can affect
7/5/2 day alarm operation
See page 3 for setting Clock/Calendar Section.
Make sure to set the alarm time and source for the alarm icon 1 or 2
that is shown on the clock display
Snooze time
is too long/short
Press and hold Snooze button then press + or - button to adjust
P12