IBM MX5 - Manual (Page 7)

Laser Warnings and Labels
• Do not look into the laser’s lens.
• Do not stare directly into the laser beam.
• Do not remove the laser caution labels from the MX5.
• Do not connect the laser barcode window to any other device. The laser
barcode window is certified for use with the MX5 only.
Caution:
Laser radiation when open. Please read the caution labels.
Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Important Battery Information
Note: This mobile device's backup battery maintains it’s charge by drawing
power from the main battery pack. Always store unused devices with a
fully charged main battery pack installed. LXE recommends an in-use
mobile device be frequently connected to an external power source to
retain optimum power levels in the main battery pack and the backup
battery. When the backup battery and main battery pack are dead, the
mobile device reverts to the last saved setup default values when a fully
charged main battery pack is installed and the device is powered On
again.
• Until the main battery and backup battery are completely depleted, the MX5
is always drawing power from the batteries (On).
• New batteries must be fully charged prior to use.
• Whenever possible, use the AC power adapter with the MX5 to conserve the
main battery and recharge the backup battery.
• When a new battery is installed in the MX5 for the first time (or when the
Backup battery is completely depleted), the Time and Date reverts to it’s
default values.
Related Manuals
The “MX5 Reference Guide” contains MX5 technical information and advanced
functions.
Refer to the "MX5 Cradle Reference Guide" for technical information relating to
the MX5 docking cradles.
Refer to the "MX5 Multi-charger Operator’s Guide" for technical information
relating to the MX5 battery charger.