Marantz VP-10S1 - Manual (Page 4)

MOUNT10 PROJECTOR MOUNT INSTALLATION INSTRUCTIONS continued
Step 4 B
Figure 7
Figure 8
1100 Maplewood Drive
Itasca, IL 60143
Phone: 630 741-0300 Fax: 630 741-0301
You can find your nearest authorized distributor or dealer
on our website at: www.marantz.com
Printed in Canada 2004
Work in a group of 4 or more to carry the projector and follow
manufacturer's guidelines for relocating as stated in the VP-10S1
owner's manual.
Lift and slide the projector onto the 6 (mm) screws previously
installed in the metal studs of the plate on the ceiling (see arrow
in Figure 7). Tighten the six (mm) screws on both sides of the
mount and install four (4) 6 (mm) screws and washers into the
side of the projector Mounting Plate 4.
Projector Mounting Plate 4 (continued) Projector Mounting Plate 4 connected to Mounting Plate 3
Sequence of Assembly of Projector Mounting Plates
Plate 1
Plate 2
Plate 3
Plate 4
8 0 Tilt 8 0 Tilt
Projector Side
Mount Side
Step 2
Step 3
Step 4
Mounts Fully Assembled
Ceiling Side
Projector Side
Plate 4