Marantz CDR300 - Manual (Page 9)

- 9 -
Controls, Display (top) continued
BASS MID TREBLE
TEXT PHANTOM PROG REPEAT MENU/STORE
DISP SINGLE A-B CANCEL/DELETE REC MODE
ERASE FINALIZE
REC
SELECT
PUSH ENTER
POWER STANDBY
CD RECORDER CDR300 PROFESSIONAL
4 a
TEXT PHANTOM PROG REPEAT MENU/STORE
DISP SINGLE A-B CANCEL/DELETE REC MODE
5
6 7
5 MENU/STORE button
Push and release to enter Menu mode.
Menu selections and changes are made using the
SELECT control (a). Turn the SELECT control to scroll
through the options. Push and release the SELECT
control to select the option. Push and release the
MENU/STORE button to store changes and exit Menu
mode.
Menu selections are available depending on if the CD
is stopped or in Play/Pause, or if REC is selected.
The table below shows which menu selection is
available under which conditions. The table also lists
which page of this manual contains instructions for
that menu item.
Menu Item Stop Play/ REC/ Page
Pause REC Pause
AUTO TRACK .............................................. X .............. 24
AUTO STOP ................................................ X .............. 24
REC BALANCE ............................................ X .............. 25
TEXT EDIT ................. X ................................................ 32
TEXT ERASE ............. X ................................................ 34
TEXT VIEW ................ X ................................................ 33
MIC EQUALIZER ....... X .......... X ................ X .............. 25
FILTER SELECT ........ X .......... X ................ X .............. 26
BATTERY SELECT .... X ................................................ 16
Notes:
1. AUTO TRACK, AUTO STOP, REC BALANCE only
operate in REC MODE.
2. TEXT EDIT, TEXT ERASE and TEXT VIEW only apply
to unfinalized discs.
6 DISP button (display)
While playing a CD push and release once to
display the remaining play time for the track.
CD
TRACK
a b
a Only TRACK is lit and steady.
b The countdown time is for the track being played.
Push DISP and release a second time and the
remaining play time for the entire CD is displayed.
CD
TOTAL TRACK
c d
c TOTAL TRACK is lit and steady.
d The countdown time is for the entire CD.
Push DISP and release again to return to the
default display showing elapsed track time.
7 REC MODE button
With a CD-R or CD-RW disc in the CDR drive,
push and release to enter recording mode. Turn
the SELECT control to select the recording mode.
Then push and release the SELECT control to
choose that mode.
Recording modes
RECORD
This is the first REC mode that appears in the
REC mode menu. You can record using the INT
mic, MIC/LINE inputs and/or AUX inputs or DIGI-
TAL input.
MINUTE TRACK
Same as RECORD but automatically records a
track every minute. During playback the tracks
every minute help you locate a specific passage.
SYNC RECORD
Use this REC mode to automatically start the
recording process from an outside digital or analog
source including DAT, minidisk, cassette tape or
LP for example.
SYNC REC+FINAL
Use this REC mode to automatically start the
recording process from an outside digital or analog
source including DAT, minidisk, cassette tape or
LP for example. When copying a CD the entire CD
is copied and automatically finalized.