Marantz CC4300 - Manual (Page 24)

English
Operations
❖
Checking the Edited Tracks
• In the edit mode, check as you do the programmed
tracks. (refer to “Checking the Programmed
Selections” on page 15)
or
❖
Clearing All Edited Tracks
• In the edit mode, press the Stop/Clear button on
the unit or the Stop/Clear button on the remote
control for more than 4 seconds.
or
• Opening the disc tray clears all edited tracks, too.
• In the manual edit mode only, you can clear or
rectify the edited tracks as you do in “Rectifying Any
Wrong Programmed Selection” or “Clearing the
Programmed Selections” on page 16 and 17.
❖
Start Edit Recording
Before start editing, connect remote control input of
Marantz cassette deck with remote control output of
CC4300 by remote control cable.
Reverse mode switch may be set to any of one side
(
O
), both sides (
p
) and continuous play (
∏
).
- Synchro recording with Marantz auto reverse
cassette deck (when set to both sides (
p) or
continuous play (
∏) mode).
1 . After setting up Edit program automatically or
manually, setup the cassette deck to rec pause
state.
2 . Press Play/Pause button of the unit to start A side
program. The player sends out signal to start
recording and starts playing A side program after 4
seconds.
3 . After A side program complete, player turns to the
pause state at the beginning of B side program.
4 . When A side of the tape ends up, cassette deck
inverts its recording direction and set to rec pause
state automatically.
5 . Press Play/Pause button of the unit manually to
start B side recording. Player sends out signal to
restart recording and starts playing B side program
after 4 seconds.
6 . After B side program complete, player stops
playing and clears edit program automatically.
• If the tape ends up before edit program of one side
completes, for example by wrong tape length have
chosen, cassette deck send out signal to player to let
the player cancel the rest of program. Player jumps
to the beginning of B side if it was A side or stop
playing and clear edit program if it was B side.
OPEN/CLOSE
9
T.SIZE TIME DIMMER EDIT
INTRO DELETE PROGRAM
8 7
0
RANDOM
9
T.SIZE TIME DIMMER EDIT
INTRO DELETE PROGRAM
8 7
0
PROGRAM
20