Marantz CC4300 - Manual (Page 23)

English
❖
Setting Up Manual Edit
1 . In the stop mode, select the manual edit mode.
Press EDIT button twice on the unit or EDIT button
twice on the remote control.
or
2 . Select the tape length as you do in “Making auto
edit” procedure.
3 . Press PROGRAM button on the unit or the
PROGRAM button on the remote control to
manually edit the tracks to be recorded.
or
4 . Edit the tracks for the side A repeating steps 3 and
4 in “Playing Tracks in Any Sequence (Programmed
Play)” procedure on page 15.
Note :
• During manual edit, if the "-" indicator in the time display
disappears and “
\
” flickers, it means that the total
time of the edited tracks exceeds the tape length. So
you should edit again.
• When a track with a number greater than 30 is edited,
the time display may show "- -- : --".
• Manual edit is only available on the current disc. If you
press
Disc selector or DISC SKIP buttons, the unit
exits from edit mode.
5 . Press EDIT button on the unit or the EDIT button
on the remote control to start editing for the side B.
or
6 . Do the above step 4 to edit the tracks for the side B.
• If the PLAY button is pressed after editing the
tracks, play starts from the first track of the side A
for recording.
• If all tracks of the side A have been played, press
the PLAY button to start play from the first track of
the side B for recording.
3 4 5 1 2
EDIT TRACK
B
PROG
REMOTE CONTROL UNIT RC4300CC
T.SIZE TIME DIMMER EDIT
EDIT
3 4 5 1 2
EDIT TRACK
A
PROG 1 2 3
4 5 6
11
3 4 5 1 2
EDIT TRACK
A
PROG
RANDOM
9
T.SIZE TIME DIMMER EDIT
INTRO DELETE PROGRAM
8 7
0
PROGRAM
3 4 5 1 2
EDIT
1 2 3
4 5 6
7 8 9
10 11 12
13 14
REMOTE CONTROL UNIT RC4300CC
T.SIZE TIME DIMMER EDIT
EDIT
19
Operations