Multi-Tech Systems Hub - Manual (Page 12)

12 CommPlete 4000 Communications Server User Guide
Chapter 2 - Installing Your CommPlete 4000
Powering Up
Note: This is pluggable equipment; the socket outlet must be installed near the equipment and must
be easily accessible.
Make sure that the voltage selector on the power supply is set to the proper voltage prior to
connecting this equipment to the main power. If the voltage selector needs to be changed, an
ordinary pencil can be used to change the switch to the position which best correlates with the known
input voltage. If the voltage selector is in the "115" position, input voltages from 100-120VAC may be
applied to the equipment. If the voltage selector is in the "230" position, input voltages from 200-240
VAC may be applied to the equipment.
Connect the power cord supplied with the CommPlete 4000 to the power cord connector on the back
of the cabinet and to an AC outlet. Press the power switch on the front of the cabinet to the ON
position. The power switch contains an LED which should light when power is applied.
Power Supply
120
120
Voltage Selector
Power Cord
Input
Monitor Power
Outlet
Fig. 2-4. Power Supply Connectors