Marantz CD5400 - Manual (Page 25)

21
ENGLISH
ENGLISH
• Checking the program or delete program
contents
During programming operation or program play, press the
SCROLL/RECALL button on the remote control unit.
With program play, the programmed tracks are displayed one
after the other in sequence on the main display.
With delete program play, the deleted tracks are displayed
one after the other in sequence on the main display.
• Changing the program or delete program
contents
Deleting tracks which were programmed for program
play
When the SCROLL/RECALL button on the remote control unit
is pressed during programming, the programmed tracks are
displayed one after the other in sequence.
As soon as the track to be deleted from the program has
appeared, press the CANCEL button on the remote control
unit immediately. The number of the deleted track is cleared
from the music calendar on the display.
Canceling the deletion of tracks which were deleted
for delete program play
When the SCROLL/RECALL button on the remote control unit
is pressed during delete programming, the deleted tracks are
displayed one after the other in sequence.
As soon as the track whose deletion is to be canceled has
appeared, press the CANCEL button on the remote control
unit immediately. The number of the track whose deletion
was canceled is displayed in the music calendar on the
display.
ADVANCED OPERATIONS
• Returning program play to normal play
(canceling the entire program)
Press the 7 button on the player or remote control unit twice
during program play or once during stop. The PROG indicator
on the display goes off, and the entire program is canceled.
Alternatively, a program can be canceled when the disc tray
is opened by pressing the OPEN/CLOSE
0 button on the
player.
Adding tracks to the program
Press the PROGRAM button on the remote control unit during
stop. The status of the PROG indicator in the display changes
from lighted to flashing, and more tracks can be added to the
program.
• Precautions for program and delete
program play
∗
When using the numeric buttons to select tracks 1 to 9 on
a CD with 10 or more tracks in total, allow 1.5 seconds or
so to elapse after the button corresponding to the number
of the previous track was pressed before pressing the
button corresponding to the number of the next track.
∗
When using the numeric buttons to select track 10 or up
on a CD with 10 or more tracks in total, press the button
corresponding to lower digit within 1.5 seconds or so after
the button corresponding to the higher digit was pressed.
∗
When using the 4 and ¢ buttons for programming,
keep pressing one of these buttons with less than half a
second or so in between until the number of the desired
track is displayed.
∗
If the total time for a program exceeds 99 minutes, the time
display will appear as “– – : – –.”
SCROLL/
TIME RECALL TEXT
AMS A-B REPEAT
RESET
SCROLL/
TIME RECALL TEXT
AMS A-B REPEAT
PITCH
PROGRAM
0
CANCEL
RANDOM QUICK REPLAY
STOP PAUSE
HONES LEVEL
PLAY OPEN/CLOSE
DISPLAY OFF
7 8 9
PROGRAM
0
CANCEL
03.4.10, 3:51 PM Page 21