Timer playback, Setting and clearing timer playback, 13 english – Marantz CD110 User Manual
Page 18
13
ENGLISH
TIMER PLAYBACK
A CD can be played at a specific time by setting the playback
time. The ON time and OFF time are set for timer playback.
1.
Press the TIMER button
i
on the remote control unit once.
On the display, "On Time" appears first followed by the
time, and the hour flashes. (Playback ON hour setting)
2.
Set the playback ON hour using the
4
and
¢
buttons
!1
on the remote control unit or the
4
/
1
and
¡
/
¢
buttons
,
on the main unit.
3.
Press the
7
button
!2
/
x
to enter the selection. The hour
input appears on the display, and the minute flashes.
(Playback ON minute setting)
4.
Set the playback ON minute using the
4
and
¢
buttons
!1
on the remote control unit or the
4
/
1
and
¡
/
¢
buttons
,
on the main unit.
5.
Press the
7
button
!2
/
x
to enter the selection.
On the display, "Off Time" appears first followed by the
time, and the hour flashes. (Playback OFF hour setting)
This flashes.
This flashes.
6.
Next, the playback OFF time is set. Repeat steps 2
through 5 to set the hour and minute.
Upon completion of the settings, the timer setting mode is
cleared automatically.
7.
Press the
0
button
n
on the main unit to extend the disc
tray, place the disc on the tray, and close the tray.
8.
Set the
button
q
/
z
on the unit to off.
The button now lights up orange.
SETTING AND CLEARING TIMER PLAYBACK
1.
Press the TIMER button
i
on the remote control unit
twice. "Timer Off" or "Timer On" appears on the display.
2.
Switch from "Timer On" and "Timer Off" or vice versa using
the
4
and
¢
buttons
!1
on the remote control unit or
the
4
/
1
and
¡
/
¢
buttons
,
on the main unit.
Select "Timer On" to set timer playback.
Select "Timer Off" to clear timer playback.
3.
Press the
7
button
!2
/
x
to enter the selection.
Important
Timer playback cannot be set if "No Disc", "Error Disc" or
"Blank Disc (CD-R(W))" is displayed.
TIMER
This lights.
TIMER