beautypg.com

Chapter 3: basic setup – Mvix MX-760HD User Manual

Page 21

background image

YW

Unicorn Information System

Chapter 3: Basic Setup

Use the left-arrow button on the Mvix Remote to navigate back

to the left-side column.

From the left-side navigation column, select MISC Setup. Use

the arrow keys and press ENTER / SELECT on the Mvix

Remote.

OSD Language: Korean vs English (Menu Language)

Sound Effect: ON vs OFF (Setup various sound effects)

Change Admin Password: (Password setup: 4-digits)

Select Background: (select JPEG file as wallpaper)

Use Def. Background: (Use original/default image as wallpaper)

Show Firmware Ver: (Verify / Confirm Firmware Version)

Factory Reset: (Reset the unit to Factory Default)

Firmware Upgrade: (Select to upgrade firmware)

Use the left-arrow button on the Mvix remote to navigate back

to the left-side column.

From the left-side navigation column, select PLAYBACK Setup.

Use the arrow keys and press ENTER / SELECT on the Mvix

Remote.

Video Display: Original (Letterbox), Expand (Pan-Scan), Full Screen (Modify

display size)

Sub Position: Top, Middle, Bottom (Select the display position of subtitles

during playback)

Sub Size: Small or Large (Select Subtitle Size)

Sub Color: (Select from a list of over 10 subtitle colors)

Slide Interval:3 sec, 5 sec, 10 sec or 20 sec (Select slide show interval for

image file playback)

If Wireless Network is selected in the previous step, the
Wireless Network Setup screen is displayed in this step.

(Use navigation arrow button on Mvix Remote to select each
setup options, Use ENTER button to display options)

ESSID: (Manually enter the Wireless Signal Name or SSID of your network

router).

Channel: (Unless using a Peer-to-Peer network, do not change anything).

Encryption (WEP): (Only select when using WEP security setting on your

network router. Select NONE, if the router runs without encyrption)

WEP Key: If using WEP encryption (above), manually enter WEP key.

Apply: Displays Wireless Network status : Success versus Fail

( Select Apply to apply settings or Press SETUP on Mvix Remote to

Apply these settings.)