Mvix MX-760HD - Manual (Page 15)

X[ Unicorn Information System
Chapter 3: Basic Setup
3.2 Installing an Internal Hard Disk Drive
3.21 Inserting the Hard Disk
NOTE: Before Installing, ensure that the jumpers on your HDD are set to MASTER or SINGLE. Hard Disks with
CABLE SELECT jumper settings may not work in Mvix Hi-Def Multimedia Player.
8. Slide the side panel cover back into place and lock the
enclosure using the case screw button at the back.
7. Connect the TWO cables to your HDD. - HDD Data Cable
(Flat Grey Cable) and 4-pin Power Cable.
4. Gently press the enclosure bracket
5. Slide the Hard Drive in the space so as to snugly fit the
HDD in the enclosure brackets.
6. Release the bracket to secure the HDD in position.
1. Locate the casing screw and turn it in clockwise direction.
2. Open the casing cover of the Mvix Player.
3. Gently lift the slide-panel cover as shown