Marantz SA8260 - Manual (Page 16)

ENGLISH
11
To start playback form the first track
Press PLAY button.
To stop playback
Press STOP button.
To eject disc
Press OPEN/CLOSE button to open the disc tray and take
the disc off. Press the button again to close the tray.
Disc tray must be closed when the unit is not be used.
To pause playback
Press PAUSE button.
PAUSE indicator will light and playback is paused at the point
that the button is pressed. To restart playback, press
PAUSE button again or press PLAY button.
To change time display
Press TIME button.
Each time TIME button is pressed, display will change in the
following order. “Track elapsed time” → “Track remaining time”
→ “Total remaining time” → “Track elapsed time”.
• Track remaining time
(The remaining playing time from the playing point to the end
of the current track)
• Total remaining time
(The remaining playing time from the playing point to the end
of the last track)
* If TIME button is pressed when a disc with text is played,
time display is given priority and text information will not be
displayed afterward. To see text information, press TEXT
button.
1. Press SOUND MODE button in stop mode
(not playing).
The layer or area currently in is shown on the display. (CD,
SACD STEREO, SACD MULTI) While selecting, sound
mode indicator will flash.
If SOUND MODE button is pressed again, a selectable
layer or area will be shown. About 2 seconds after the
layer or area will be switched to new one.
* When layer or area is switched, TOC will be read again.
* If a CD disc or SACD disc with stereo area only is loaded,
sound mode cannot be changed.
* When a hybrid SACD disc that has both stereo and multi-
channel areas is loaded, sound mode will be changed
in the following order.
SACD multi-channel area → SACD stereo area → CD
layer
* Sound mode can be selected while the tray is open.
Select a desired layer or area and press PLAY
button then the tray will close and playback will be
started.
• Displaying the number of tracks in a SACD multi-
channel disc
If SOUND MODE button is pressed once during playback,
the number of channels being played will be shown.
Examples
6ch : Sub-woofer channel will be played.
5ch : Sub-woofer channel will not be played.
For some discs recorded in 4ch or 3ch,
“5ch” will be displayed.
4ch or 3ch : If loaded disc is made to show the channel
display, 4ch or 3ch will be displayed.
* See software (disc) jacket or attached instraction for signal
output terminals for 4ch or 3ch discs.
■
Switching Sound Mode (SACD)
T R K T I M E
1 5 1 6 1 7 1 8 1 9 2 0
T R K T T L T I M E
1 5 1 6 1 7 1 8 1 9 2 0
SUPER AUDIO CD PLAYER SA8260
/ OPEN/CLOSE
LEVEL
PLAY
PHONES
PAUSE STOP
/
SOUND MODE
DISPLAY OFF
TIME
CD MULTI
TEXT DISPLAY
STEREO SACD
ON/STANDBY
STANDBY
+ -
POWER
G
“-” is displayed
“-” is displayed “TTL (TOTAL) is displayed
Sound mode indicator
Number of channels is displayed