Marantz SA8260 - Manual (Page 15)

ENGLISH
10
★ In this instruction manual, some operations can only be performed with the remote control. For operations that can be
performed with buttons both on the main unit and on the remote control, the button names are shown in the mark.
And for operations that can only be performed with buttons on the remote control, the button names are shown in the
mark.
OPERATION
Connecting the power supply
1 Plug the power cable into AC IN jack on the back panel.
2 Turn on the power switch of the audio unit (amplifier, etc.)
that is connected with this unit. Set the selector on the
connected unit to this unit.
3 Plug the power cable into an AC outlet.
* The unit turns into stand-by mode and stand-by indicator
lights.
Normal Playback
■
SACD player playback
q
Press POWER switch to turn on.
Display indications
w
Press OPEN/CLOSE button.
The disc tray opens. Set a disc on the tray. Make sure the
label side is up.
e
Press OPEN/CLOSE button.
r
Press PLAY button.
Disc type is automatically detected and playback is
started. Track number and track elapsed time(minute,
second) appear on the display.
* When a SACD/CD hybrid disc is loaded, SACD layer is
automatically played. If you want to play CD layer, use
SOUND MODE button to select CD layer.
(Exp.:Track 6, Elapsed time 2 min 8 sec)
Playback automatically stops at the end of the final track.
AC IN
SUPER AUDIO CD PLAYER SA8260
/ OPEN/CLOSE
LEVEL
PLAY
PHONES
PAUSE STOP
/
SOUND MODE
DISPLAY OFF
TIME
CD MULTI
TEXT DISPLAY
STEREO SACD
ON/STANDBY
STANDBY
+ -
POWER
M H G
T R K T I M E
6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0
Number of current track Minutes Seconds
Remaining track numbers