Marantz CC3000 - Manual (Page 17)

• Press PLAY 2.
– The remaining tracks will now be played.
– After the last track play will stop;
lights up.
NOTE!
– As soon as you press PLAY
2 the other changer
functions will temporarily be switched off to prevent
the recording being interfered with; EDIT ACTIVE
lights up if you press one of the other buttons during
recording.
– You can quit the EDIT mode by pressing STOP 9. or
OPEN/CLOSE ; EDIT CANCELLED then lights up.
– EDIT NOT POSSIBLE lights up if you try to record a CD
containing more than 40 tracks.
– Should the CD or the program be longer than the
total recording time of the tape, play will stop after
the last track that fits onto side B of the tape.
– Should the first track of the first CD or the program
be longer than one side of the tape (= the entered
recording time divided by two), then EDIT NOT
POSSIBLE will light up. You will now have to enter
another recording time.
Synchronized Recording
• Make sure that the changer is connected via the
REMOTE CONTROL sockets to the REMOTE CONTROL
IN (RC 5 IN) sockets of the Marantz cassette deck.
• Set the changer to EDIT mode.
• Select the
© (auto reverse) mode (if available) on
the cassette deck.
• Set the TIMER switch (if available) on the deck to
‘PLAY/SYNC REC’ position.
– The cassette deck will go into REC PAUSE mode
(=synchrosized recording mode).
• Press PLAY on the CD Changer.
– Recording starts and after 4 seconds play starts at the
beginning of the CD or the programme.
– After each track an extra pause of 4 seconds (AUTO
SPACE will be inserted.
– AUTOSPACE lights up.
– If you record a programme from different CDs the
cassette deck will go into PAUSE mode everytime the
CD Changer selects a new CD in the CD compartment.
As soon as playback of the new CD starts, the deck
will continue the recording.
– After the last tract that fits on side A of the tape, the
CD changer will go into PAUSE mode.
– As soon as the CD changer receives a command from
the cassette deck, playback starts with the first rack
for side B. You may also press PAUSE to restart play.
– Synchrosized recording will stop after the last track of
the CD or programme.
NOTE!
– As soon as you start recording, the other changer
functions will temporarily be switched off to prevent
the recording being intefered with; EDIT ACTIVE lights
up if you press one of the other buttons during
play/recording.
– You can stop playback/recording by pressing STOP.
Maintenance
The CDs
• Never write on the printed side of
a CD.
• Do not attach any stickers to the
CD.
• Keep the shiny surface of the disc
clean. Use a soft lint-free cloth
and always wipe the disc in a straight line from
centre to edge.
• Never use cleaning agents for conventional records.
• Detergents or abrasive cleaning agents should not be
used either.
The changer
• A chamois leather slightly moistened with water is
sufficient for cleaning the changer.
• Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives.
Environmental Information
All unnecessary packaging material has been omitted.
We have done our utmost to make the packaging easily
separable into three mono-materials: cardboard (box),
polystyrene foam (buffer) and polythene (bags, protective
foam sheet).
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company.
Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and
old equipment.
17
English
EDIT ADDITIONAL INFORMATION