Connecting to, Meridian 500 series equipment, Meridian 500 series operation, setting – Meridian America 507 User Manual

Page 24: For 500 series operation

Setting up the compact disc player

To connect to other Meridian 500
Series equipment

●

Connect one of the COMMS sockets on the back panel of the

compact disc player to one of the COMMS sockets on

another 500 Series unit, using the 500 comms lead provided

with the other unit.

The sequence in which you connect the units is not important.

507 Compact Disc Player

500 Series unit

COMMS

Then configure the units with the following automatic setup

procedure:

●

Switch all the units to standby.

●

Press Clear on the remote.

Each unit will display:

Auto

One unit will then be designated

as the controller, and display:

Con.

This is the unit that will respond to the remote.

All the other units will be configured

as non-controllers, and display:

N.Con.

Your system is now set up and ready for use.

If for any reason the automatic setup does not give the

configuration you want, restore the default operation by

Note: Do not, under any circumstances, connect any equipment

other than Meridian 500 or 800 Series to the socket marked

COMMS on the back of the compact disc player.