1 getting started – Maxplus Industries HTS 2100S+ User Manual

Page 10

Manual Scan

Select a transponder.
To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
To add a new transponder, press the GREEN button.
To delete a transponder, press the YELLOW button with the cursor next to the Frequency
parameter.
To search a transponder, set its different parameters and press

6.1 Getting Started

Package Identifier (PID) Scan

. You can search

a specific channel of the transponder by setting its PID data (Video, Audio and PCR).

Note : If you cannot access programs after correctly completing a scan procedure,

please contact your seller or your installer.

You can use

to navigate between channels until you find the channel you want.

If you know the channel number, you can enter it with the NUMERIC buttons and wait 2
seconds until the channel is changed.
If you know the channel name or transponder or CAS, you can press

to display the

channel list

4) Channel Selection

In the left side of screen, detailed information about the selected channel will be
displayed. (Satellite Name, Frequency(Polar) and Channel Name)
You can use the following buttons to navigate between channels:
-

: Moves one channel up/ down.

: Moves one page up / one page down.

- RED : Shows all channels in the current group.
- GREEN : Shows all channels sorted alphabetically.
- YELLOW : Shows all channels sorted by Transponder.
- BLUE : Shows all channels sorted by CAS system.

Press

when the selection bar is positioned on the desired channel.

VOL

6.1 Getting Started