Speaker setup – GoVideo DHT7100 User Manual
Page 26

20
DVD System User’s Guide
4
This chapter shows how to fine tune your speaker settings, including size, delay, balance
and levels. You can also set language preferences, screen size, and digital output.
A D V A N C E D S E T U P
SPEAKER SETUP
S E T T I N G S P E A K E R S I Z E S
Press the SPK MODE button repeatedly to
set the relative size of each speaker:
F r o n t S p e a k e r S i z e
Press the LEFT/RIGHT ARROW keys to
select SMALL (default) or LARGE.
C e n t e r S p e a k e r S i z e
Press the LEFT/RIGHT ARROW keys to
select SMALL (default), LARGE or NONE.
R e a r S p e a k e r S i z e
Press the LEFT/RIGHT ARROW keys to
select SMALL (default), LARGE or NONE.
S u b w o o f e r S i z e
Press the LEFT/RIGHT ARROW keys to
select USE (default) or NONE.
A D D I N G C E N T E R & R E A R D E L A Y S
If your center and/or rear speakers are
closer to your primary listening area than
your front speakers, you can add a delay so
that the sound from all five speakers arrives
at approximately the same time. Assume 1
MS (millisecond) of delay for every one foot
of distance; see “Calculating Delays” on
page 21.
Press the SPK MODE button repeatedly to
adjust each of the following:
C e n t e r D e l a y
Press the LEFT/RIGHT ARROW keys to set
the center speaker delay from 0-5MS.
R e a r D e l a y
Press the LEFT/RIGHT ARROW keys to set
the rear speaker level from 0-10MS.
SPK Mode
C - DEL 00MS
R - DEL 00MS
F - SP SMALL
C - SP SMALL
R - SP SMALL
SW - SP USE
N O T E
• It is not necessary to change speaker size
settings unless you are connecting different
speakers to the unit.
• Be sure to use speakers with the same
specifications (see p. 28)