Pecifications – Goodman Mfg SS-GME8 User Manual
Page 3
2
www.goodmanmfg.com
SS-GME8
SS-GME8
www.goodmanmfg.com
3
P
roduct
S
PecificationS
P
roduct
S
PecificationS
s
peciFications
GME8
0603B*B
GME8
0805C*B
GME8
0805D*A
GME8
1005C*B
Performance Data
Input¹
60,000
80,000
80,000
100,000
Output¹
48,000
64,000
64,000
80,000
LP Output¹
48,000
64,000
64,000
80,000
AFUE²
80
80
80
80
Tons AC @ 0.5” ESP
3
5
5
5
Temperature Rise Range (°F)
20 - 50
35 - 65
30 - 60
35 - 65
Circulator Blower
Size (D x W)
10 X 8
10 X 10
10 X 10
10 X 10
HP
1/2
1
1
1
Speed
5
5
5
5
Vent Diameter³
4
4
4
4
No. of Burners
3
4
4
5
Disposable Filter (in²)
290
480
480
480
Electrical Data
Min. Circuit Ampacity⁴
8.2
14.8
14.8
14.8
Max. Overcurrent Protection⁵
15
15
15
15
Ship Weight (lbs)
98
116
123
120
¹ Low-fire rate is 75% of high-fire rate.
² DOE AFUE based upon Isolated Combustion System (ICS).
³ Vent diameter may vary depending upon vent length. Refer to the latest editions of the National Fuel Gas Code NFPA 54/ANSI
Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in Canada).
⁴ Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be deter-
mined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
⁵ Refers to maximum recommended fuse or circuit breaker size; may use fuses or HACR-type circuit breakers of the same size as noted.
Notes
• All furnaces are manufactured for use on 115 VAC, 60 Hz, single phase electrical supply.
• Gas Service Connection ½” FPT
• Important: It is required to size overcurrent protection device and wires properly and make electrical con-
nections in accordance with the National Electrical Code and/or all existing local codes.