Fujitsu Siemens Computers BS2000/OSD - Manual (Page 71)

U25339-J-Z126-1-7600 71
Standard processing in SVP mode User frames
1 ENABLE automatically executes IPL after IMPL
2 DISABLE does not execute IPL, i.e. IPL must be triggered
manually using PROGRAM LOAD FRAME: BASIC
or PROGRAM LOAD FRAME: DETAIL-1.
INITIAL FRAME =>
Here you can set the display form of the PROGRAM LOAD FRAME.
1 LOAD FRAME (BASIC) PROGRAM LOAD FRAME: BASIC (see page 50)
2 LOAD FRAME (DETAIL) PROGRAM LOAD FRAME: DETAIL-1 (see page
51)
Special key functions
catalog settings
switches to LOAD PRESET2 screen
Figure 32: AUXILIARY FRAME: LOAD PRESET2 screen
You can set the operation mode by making an entry in this frame and pressing the key.
VM MODE => Selection of the firmware to be loaded from SVP
1 NATIVE for BS2000 operation
2 EMOS not used on the S130 Business Server
3 AVM/EX for VM2000 operation
P12
P9
----- AUXILIARY FRAME: LOAD PRESET2 ----- E02L01F
-VM MODE- -EXA MODE-
==> 1 ==> 1
>1 NATIVE >1 ENABLE
*2 EMOS *2 DISABLE
*3 AVM/EX
-START IPL NO-
==> 1
*1 FIX(1)
>2 CURRENT
*PF12 CATALOG
*PF9 GO TO LOAD PRESET-1
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
P12