Fisher & Paykel OR90 - Manual (Page 40)

38
Care and cleaning
Replacing the oven lamp
1 Turn the power to the cooker off at the wall.
2 Let the oven cavity and the heating elements cool down.
3 Remove the protective cover ‘B’.
4 Unscrew and replace the bulb with a new one suitable for high temperatures (300 o C) with the
following specifications: 230-240V, 50Hz, E14 and same wattage as the bulb being replaced
(check wattage stamped on the bulb).
5 Refit the protective cover, ‘B’.
Note: oven bulb replacement is not covered by your warranty.
Fig.47 Removing the oven lamp
A B