Furuno MU-155C - Manual (Page 9)

3
Desktop mounting
The display unit can be mounted on a desktop, using the optional hanger,
Type: FP19-00900, Code No.: 001-410-540.
Contents of hanger mounting kit
Name Type Code No. Qty
Hanger FP19-00901 001-410-550 1
Knob bolt FP03-09204 008-523-650 2
Self-tapping screw 5x20 000-802-081 4
1. Fasten the hanger to the mounting location with four self-tapping screws (supplied).
Note: Do not mount the unit where the exhaust or intake vent may be obstructed.
Intake vent Exhaust vent
Display unit, rear view
2. Screw knob bolts in unit.
3. Set unit to hanger, and then tighten knob bolts.
4. Remove the hard cover from the unit.
5. Attach the cosmetic caps (supplied as accessories) to the unit at the locations shown in
the drawing below.
6. Attach hard cover to protect the LCD.
Knob bolt
Hanger
Cosmetic cap
Desktop mounting