Furuno MU-155C - Manual (Page 13)

7
3. ADJUSTMENTS
Adjust the MU-155C according to the equipment connected. Note that you can adjust the
display currently selected, at the DISP selection window. (See section 4.3.)
Note:
The example screens shown in this manual may not match the screens you see on
your display. The screen you see depends on your system configuration and equipment
settings.
3.1 RGB/DVI Setting
RGB1 and RGB2 screens can be adjusted independently. Also, DVI screen can be adjusted
similarly.
1. Press the [MENU] key to show the main menu.
The main menu is erased automatically with no operation for one minute.
2. Press the [◄] or [►] key to select RGB1, RGB2 or DVI as appropriate.
RGB1 (RGB2) setting menu
DVI setting menu
3. Press the [▲] or [▼] key to select the item to adjust.
4. Press the [◄] or [►] key to adjust.
5. Press the [MENU] key to close the menu.
RGB1 RGB2 DVI VIDEO1 VIDEO2 VIDEO3 OSD SYSTEM
H_SIZE 640
V_SIZE 480
PHASE
16 (1 – 32)
CONTRAST 44 (1 – 64)
H_POSITION 50 (1 – 99)
V_POSITION 25 (1 – 40)
R_LEVEL 31 (1 – 64)
G_LEVEL 31 (1 – 64)
B_LEVEL 31 (1 – 64)
TEMPERATURE 7000K (5500K/6500K/7000K/8000K)
B STRETCH OFF (OFF, 1 – 10)
W STRETCH OFF (OFF, 1 – 10)
DISP MODE FULL (FULL/EVEN/NORMAL)
SHARPNESS 5 (1 – 10)
RGB1 RGB2 DVI VIDEO1 VIDEO2 VIDEO3 OSD SYSTEM
CONTRAST 44 (1 – 64)
H_POSITION 25 (1 – 50)
V_POSITION 25 (1 – 40)
R_LEVEL 31 (1 – 64)
G_LEVEL 31 (1 – 64)
B_LEVEL 31 (1 – 64)
TEMPERATURE 7000K (5500K/6500K/7000K/8000K)
B STRETCH OFF (OFF, 1 – 10)
W STRETCH OFF (OFF, 1 – 10)
DISP MODE FULL (FULL/EVEN/NORMAL)
SHARPNESS 5 (1 – 10)