Meridian Audio 565 - Manual (Page 54)

Setting up sources
50
The following examples illustrate how you can configure the
source options to your own requirements.
To change a source label
● Display the source you want to configure, together with its
current label, as described in To configure a source, page 47.
For example, to configure the
Radio source label choose:
RD RD
● Press A or V to step between the alternative labels.
For example, to use the label FM
for the Radio source set it to:
RD FM
Over 50 alternative labels are provided to allow you to choose
the most appropriate ones for your sources. Selecting None
turns off the source.
Examples of configuring the sources
To use a source key to change DSP
preset
If you have fewer than 12 different sources you can use some of
the source keys on the Meridian System Remote to change the
DSP preset.
● Configure the source key you are going to use with the audio
input set to Last Valid, and the required DSP preset.
For example: Source CDR, Label C1, Audio input Last Valid,
2-channel Preset Ambisonic.
Selecting the CDR source key will now switch the DSP preset to
Ambisonic, leaving the input unchanged.